|
Main Features
■European 86 type wall outlet compatibility Design
■High performance Qualcomm QCA9531 Chipset, 802.11b/g/n Support
■64MB DDR SDRAM + 16MB Flash Build-in for Higher Performance
■Gateway / Wi-Fi Repeater / Wireless AP operation modes
■Active 48V PoE supports up to 100 meters (200 feet) deployment
■Wireless LAN Controller Central Management Support
■1 x 10/100M RJ45 WAN(PoE) Port, 2 x 10/100M RJ45 LAN Port, 1 x Phone in Port.
Descriptions
MFAP610 is a 300Mbps wall mount style wireless access point with Qualcomm Chipset, 300Mbps fast data rate, designed for hotel/home mainly to provide secure Internet access in guest room, living room and lobby, equipped with stable PoE power supply solution, suitable for all kinds of business deployment.
European 86 type In-wall Design
Coming with standard size of an electrical receptacle design and stylish appearance, it blends in with most interior decorations in an office or room. You can easily install it into an existing power outlet.
AP Controller Centralized Management Support
Based on CAPWAP protocol, AC controller Centralized Management, easy in installation, monitoring and management, greatly save the whole cost.
300Mbps Wireless N Speed – Extend Wireless Coverage
With wireless speeds of up to 300Mbps and advanced MIMO technology, the MFAP610 provides you with a fast, reliable wireless connection for lag-free online gaming and video streaming.
Active PoE Power Supply, Stable and Energy Conservation
Comply with IEEE 802.3af standard PoE power supply, same cable supply network data and PoE power together, high efficient, low energy, low heat, long time stable work.
High Performance Wi-Fi Antenna, more stable Wi-Fi Signal
Built in 2*2 MIMO Omni ceramic Antenna, Stronger wireless signal and more wireless coverage
Adjustable RF Power, Improve Wireless Quality
The transmission RF power is adjustable based on environment. Cut down RF power in place with high density of people or wireless AP to reduce Wi-Fi interference; Increase RF power in large area to improve the signal strength.
Smart Roaming and Load Balance Technology
Integrated smart core algorithm, end user will seamless switch to wireless AP with better signal strength, load balance with better performance.
Smart LED Wi-Fi button
Press this Wi-Fi button, Wi-Fi Enable, LED around the button turns to green; Press this Wi-Fi button again, Wi-Fi disable, LED turn off. Control the Wi-Fi based on needs, energy saving.
Huge Client Access and Concurrent Processing Ability
Deeply optimized the hardware and firmware, max to allow 64 end users to access; Tested 40+ concurrent end users.
Multiple Operation Modes
Support Versatile Access Point Mode Gateway/Repeater/AP, and Ping Watch Dog which enables the device to reboot itself if the device has any errors. This self-recover feature reduces the time spent manually configuring the device.
Simple to install, easy to use
Fast installation in four steps based on the existed network frame.
Specifications
Wireless | |
Wireless Standards | IEEE 802.11n/g/b 2.4GHz |
Data Rate | Up to 300Mbps |
Frequency Range | 2.4-2.4835GHz |
RF Power | 11n @MCS7:14±2DB, @MCS0:16±2DB. 11g @54M:15±2DB, @6M:17±2DB. 11b @11M:18±2DB, @1M:20±2DB. |
Receive Sensitivity | 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. |
EVM | 11n: ≤-28 DB 11g: ≤-25 DB 11b: ≤-10 DB |
Modulation Type | OFDM=BPSK, QPSK, 16-QAM, 64-QAM; DSSS=DBP SK, DQPSK, CCK |
Wireless | Auto-Channel selection Distance Control (802.1x Ack timeout) Multiple SSID BSSID |
PPM | ±20ppm |
Max. Access Users | 40 |
Operation Mode | Wireless AP, Gateway, Wi-Fi Repeater |
Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
Hardware | |
Chipset | Qualcomm QCA9531 |
Flash | 16MB |
SDRAM | 64MB DDR |
Interfaces | 1 x 10/100Mbps WAN Port(POE) 2 x 10/100Mbps LAN Port 1 x Phone in |
Button | Reset Button, press 15 seconds to revert to default data |
Antenna | 2x MIMO 2.4GHz 2dBi internal omni antennas |
Power Supply | PoE, IEEE 802.3af standard, 48V |
Dimensions( W x D x H ) | 86*86*35mm |
Management | |
System Settings | Web-based configuration (HTTP/Telnet), Access Control System (SNMP) |
Firmware Upgrade | Upgrade firmware via web browser or TFTP |
Administration | Admin Password can be configured |
System monitoring | Watch dog, Status in hand, useful statistic and Event log |
Logs | Supports local logs, logs host, logs file export |
Reset | Reset or factory defaults |
Backup | Restore settings & configuration of the device to local file, Scheduled reboot |
Others | |
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, Windows 10, MAC OS, NetWare, UNIX or Linux |
Operating Temperature | -20°C~55°C |
Storage Temperature | -40°C~70°C |
Relative Humidity | 5% ~ 95%, Non-condensing |
Storage Humidity | 5%~95%, Non-condensing |
Certifications | CE,FCC,ROHS |
Package Contents | 1 x in wall AP 1 x English Installation Guide |